Universal cylinders, for changing workpiece sizes
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
Universal cylinder,
installation depth adjustable
via a Seeger-L-ring,
single-acting
Contact bolts
for screwing into the
internal thread of
the piston rod
(Accessories)
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
Description
The universal cylinder is suitable to process changing work pieces with variable sizes in one clamping fixture. They are equipped with support ring and plug-in disk. Thus the cylinder can be directly installed into the fixture body. The design makes it possible to adjust the built-in depth in 10 mm increments.The universal cylinder with piston Ø 50 mm has a G1/8 ventilation screw.
The cylinder must be protected from ingress of any coolants or cutting fluids into the spring chamber. The arrangement of the cylinders must be realized in a way that the ingress of liquids through the sintered metal air filter is prevented. Alternatively, the protection can be done by appropriate protective measures.
For pressure oil supply the single-acting cylinder is equipped with threaded ports. In the internal piston thread there can be screwed-in eg. contact bolts. The universal cylinder with piston Ø 10 mm will be supplied including the contact bolt. Contact bolts for other cylinders are available as accessories.
Seal kits including fasteners are available as spare parts.
-
suitable for changing workpiece sizes
-
any installation position possible
-
installation depth adjustable in 10 mm increments
-
easy to replace
-
standard cylinders and special designs available
Application example:
Data sheet 220-2
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
Operating pressure:
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
pmax. 500 bar
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
Operating method:
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
single-acting with reset spring
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
Piston Ø:
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
10, 25, 40 and 50 mm
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
Stroke:
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
20, 22, and 50 mm
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
Thrust force:
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
from 0,7 kN at 100 bar up to 78 kN at 500 bar
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
Traction force:
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
from 28 N up to 390 N
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
Oil supply:
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
threaded port G1/4
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
Sealing:
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
NBR -10°C up to +80°C
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
Wiper:
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
soft wiper and metal wiper
![](/components/com_dropeditor/assets/images/1x1-pixel.png)
Data sheet (PDF):
![](/components/com_dropeditor/assets/images/1x1-pixel.png)