Universal cylinders, with optional installation depths

With the double-acting universal cylinder, variable work piece sizes can be processed in one fixture. Because of the design, this cylinder can be used either as a thrust cylinder or a clamping cylinder. The universal cylinder is equipped with a stable circlip. It can thus be installed into a through-bore of the fixture body. The mouthing depth can thereby be adjusted in two stages.

For the purpose of supplying pressure oil, the double-acting cylinder is equipped with threaded ports. The connection can be either axial or radial. Depending on the type of connection, the locking screws may need to be exchanged. In order to prevent the penetration of shavings and liquids, the piston glides through a soft wiper made of polyurethane. Contact bolts, for instance, may be attached to the internal thread of the piston.

• suitable for changing workpieces sizes

• any installation position possible

• adjustable built-in depth

• easy to replace

• threaded connections, axial and radial

• standard cylinders and special designs available

Application example:

 

 

1. Cylinder fixture
(not included in scope of supply)

 

 

Operating pressure:

pmax. 500 bar

 

Operating method:

double-acting

 

Piston Ø:

25, 32, 40, 50 and 63 mm

 

Stroke:

32, 40, 50 and 64 mm

 

Thrust force:

from 4,9 kN at 100 bar up to 124,4 kN at 500 bar

Oil supply:

threaded port G1/4 or G3/8

Sealing:

NBR -10°C up to +80°C

Wiper:

soft wiper

Data sheet (PDF):

 

For technical details and dimensional drawings download the current data sheet.

 

Product configurator:

With our product configurator, you can put together your desired products step by step. Then the following options are available:

 

• generate an order number
• request a quote
• download 3D models